Top
audio_capture
audio_decode
audio_encode
audio_lowpower
audio_mixer
audio_processor
audio_render
audio_splitter
image_decode
image_encode
image_fx
image_read
image_write
resize
source
transition
write_still
clock
null_sink
text_scheduler
visualisation
read_media
write_media
camera
egl_render
video_decode
video_encode
video_render
video_scheduler
video_splitter
Custom Index
Metadata

OMX.broadcom.transition

210
211
transition
212

An image processing stage that generates transitions between two input images.

PortIndexNotes
210 211OMX_IndexParamPortDefinition

Set this to control the input size of the image. Typically this is called by the component itself when this port is tunnelled with an appropriate output port. The image format must be YUV420 packed planar. nSliceHeight must be nFrameHeight rounded up to a multiple of 16. nStride must be nFrameWidth rounded up to a multiple of 32. After one input port is enabled, both the second input port and the output port must be set to the same input size.

212OMX_IndexParamPortDefinition Get this to show what the output size will be. Set to alter the number of buffers to be used only.
OMX_IndexConfigCommonTransitionEffect Used to set and start the next transition effect. Setting this config may fail if the component is either starting or finishing a transition effect. The last input port to be enabled is used as the stop image.
OMX_IndexConfigTransitionControl Query / set the internal representation of transitions. This allows fine-grained control of the exact effect, frame rates, and transition duration.
OMX_IndexParamImagePoolDisplayFunction Used to set up proprietary communication with the next component.
210 211 212OMX_IndexParamImagePortFormat Query / set the image format used on this port. Currently all ports only support the YUV420PackedPlanar uncompressed image format.
 OMX_IndexParamImagePoolSize Used to configure the memory size for the internal buffer used to allocate output frames. It will default to the size of the output frame, with num_pages as 3. If this is set before either input port is configured, it will pre-allocate the buffers used for input images as well as the output pool, which gives better memory allocation performance during slideshows.